| HOME | PRODUCTS | INSTRUCTIONS | FAQ | ABOUT US | CONTACT US |
Frameacube Installation Instructions |
|
Always hold pin by the middle plastic holder. Do not change pin with a picture in the frame. Never change pin without the protective shipping foam. Warning: Pins are very sharp and may cause injury if improperly used. KEEP AWAY FROM CHILDREN. |
To re-orient frame horizontally or vertically:
Remove pin from frame.
Replace pin in desired horizontal or vertical position. Align pin with holes, lower pin to a horizontal position and gently push pin forward. (DO NOT FORCE THE PIN THROUGH THE HOLES)
To insert a picture:
1 - Separate picture frame front and back layers as shown by pulling gently between layers.
2 - Position picture on top of adhesive blocks.
3 - Reposition picture frame front to frame back layer as shown.
To install your frame on your cubicle walls:
Insert the pin into the cubicle wall at approximately 45-degree angle while holding both sides of the frame using a downward motion.
Align your frame as desired.